Audit Lock, 3006 and 3007, Titan, Spartan
If the safe incorporates a re-locker device plate, it will likely attach to the lock body as shown. If it attaches using the lock�s cover screw, make sure the screws engage the lock by at least four threads. Substitute longer 8-32 machine screws if necessary. It may be necessary to trim longer screws to a proper working length. The relock device attaching screws must NOT be longer than the depth of the tapped hole provided in the lock case. A screw should not penetrate the threaded hole more than .150 inch. The hole is actually about .160 inch deep.
Applicable to:
Titan, Spartan, Audit 2.0 Pivot Bolt and DDrive